Metallising Wire
Metallising Wire
We are one of the largest Manufacturer & Exporter of Aluminium Metallizing Wire in Central India, having a definite quality management system, we are regarded as the noteworthy supplier of an extensive gamut of Aluminium Metalizing. Provided metalizing is manufactured by utilizing optimum quality raw material and latest technology.
Metallizing Wire – Chemistry detail per alloy Composition (%)
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ga | V | Ti | Others | Al |
| 1100 | 0.95 | .05-.20 | 0.05 | – | – | – | 0.10 | – | – | – | 0.15 | 99.00 | |
| 1350 | 0.10 | 0.40 | 0.05 | 0.01 | – | 0.01 | – | 0.05 | 0.03 | 0.02 | 0.10 | 99.50 | |
| 1188 | 0.06 | 0.06 | 0.005 | 0.01 | 0.01 | – | – | 0.03 | 0.03 | 0.05 | 0.01 | 0.014 | 99.88 |
| 1080 | 0.15 | 0.15 | 0.03 | 0.02 | 0.02 | – | – | 0.03 | 0.03 | 0.03 | 0.05 | 0.02 | 99.80 |
| 1090 | 0.07 | 0.07 | 0.02 | 0.01 | 0.01 | – | – | 0.03 | 0.03 | 0.05 | 0.01 | 0.01 | 99.90 |
| 1199 | 0.006 | 0.006 | 0.006 | 0.002 | 0.006 | – | – | 0.006 | 0.005 | 0.005 | 0.002 | 0.002 | 99.99 |
Other alloys available on request
Temper designation
| U.S.A. & Canada | |
| O | Annealed. Material in lowest strength condition. |
| F | As manufactured. As drawn, without thermal treatment or deliberate strain hardening to a specific temper. |
| H 12 H 14 H 16 H 18 H 19 |
Strain hardened. Material subject to the application of cold work after annealing or combination of cold work and partial annealing / stabilizing in order to secure specific mechanical properties. The designations are in ascending order of tensile strength. |
Our Equipment Supports Many Different Industries:
Automotive Restoration
Bridge Work
Structural Steel Work
Manufacturing Facilities
Painting Facilities
Pipe Manufacturers
Non-Slip Coatings
Deck Coatings
Machine Element Repair
Boiler Repair
Arts & Crafts
Corrosion Control
Steel and Concrete Structures
Windmills
Just to name a few …
